Ball Valves for Chemical Plants: The Ultimate Guide

Ball Valves

Chemical plants require to store various chemicals in a high volume. In these chemical plants, two or more chemicals mix in a vessel and store a new combined chemical. The chemical plants also carried hazardous chemicals as well as corrosive chemicals. The corrosive chemicals like acids destroy the pipes and cause leakages. Some chemicals are so dangerous that they can burn the skin if they get into contact. Chemical plants require a precise control system to control their chemicals. Many industrialists use automation valves to avoid physical contact.

Why Valves are used in Chemical processes?

In every process where fluid storage is required, the valve is essential to control the fluid. If the chemical-filled vessel directly connects to the pipeline without any kind of valve, then you can’t control or stop the vessel’s chemical flow out. It is mandatory to install a valve just before the pipeline. Because of this, you can open and stop the chemical flow as per your requirement. When it comes to diverting or mixing the fluid to another pipeline, you can also use a 3-way valve at that point. It is also mandatory to install the valve at the end of the pipeline. Otherwise, an open-ended pipeline would flow out all the fluid without your permission.

Which Type of Valves are used in Chemical Industry?

There are various valves designed to control the various flows. Either the flow of fluid, gas, or flow of slurry. Lined valves are specially designed for corrosive media. So we can say that all kinds of valves which are designed to control the fluid flow can be used in chemical plants. Just like plug valves, gate valves, ball valves, check valves, and butterfly valves. Among all of these valves, the lined valves are most favorable because of their unmatched properties. The chemical plants use actuator-operated automatic valves that prevent physical contact with the operator.

Also, check Benefits of Motorized Valves

Which Type of Ball Valves are used in Chemical Plants?

The ball valve is one of the most common and reliable industrial valves. Its fast action efficiency with a tight seal makes it an unmatchable valve. As you know it just needs a quarter turn to come into action. Ball Valve is the first choice of chemical industrialists. The three-piece design ball valves are easy to clean and readily available with PFA & PTFA seat materials. The PFA & PTFA lined ball valves are specially designed for corrosive applications.

QB3 Model Ball Valve

Advantages of using Ball Valve in Chemical Plants

The ball valves’ biggest advantage is that they perform quickly. They are leakproof and available in multiple-way, like 3-way and 4-way. The ball valves come in various designs that open a wide range of sizes and choices. Ball Valves can be easily fitted to any kind of pipe end connection. The ball valves are easily available with Flanged, Screwed, wafer end, and Tri-Clover end connections. Side entry ball valves and three-piece design ball valves are easy to clean and replace any parts instead of replacing the whole valve.

Ball Valve Manufacturer in India

There are many industrial valve suppliers are present in the market. It is difficult to select one of them. All of the valve suppliers boast of having good quality industrial valves. So will you select any one of them blindly? I think you won’t. Correct? So here I have a few questions to ask the supplier before selecting them. Ask them do they have their inventory. If yes then ask do they offer any kind of warranty on their products. Then ask do they have valid certificates for the products and follow international guidelines in making the products. If they answer positively, select one of them and get your quote. Here I recommend Cair Euromatic Automation a well-known ball valve manufacturer in India. They have a wide range of industrial valves including ball valves as well.

Leave a Reply

Your email address will not be published. Required fields are marked *